Customized molded ear plugs, safe silicone customized molded ear plugs with NRR 26dB

Delivery term:The date of payment from buyers deliver within days
  • Price:

    Negotiable

  • minimum:

  • Total supply:

  • Delivery term:

    The date of payment from buyers deliver within days

  • seat:

    Beijing

  • Validity to:

    Long-term effective

  • Last update:

    2017-12-28 19:56

  • Browse the number:

    163

Send an inquiries
+
Guangzhou Aier Slow Rebound Foam Earplug Co. Ltd
Contactaixin:

Contactaixin:

aierfoam(Mr.)  

telephone:

Area:

Beijing

Address:

East Section, 3rd Floor of Workshop, No. 1, Heting Sansheng South Street, Renhe Town, Baiyun District, Guangzhou, Guangdong, China (510520)

Website:

http://aierfoam.nbtfzs.com/

+
Model Number: CM-26-2 Key Specifications/Special Features: The competitive advantage of custom molded earplug: 1. Attenuation value to be effectively guaranteed. 2. Work environment: can effectively guarantee the surrounding sounds can be perceived. 3. Noise conditions: noise attenuation to the safe range, while retaining the useful speech signal. 4. Needn't the removal of the earplugs can communicate with peers. 5. Fit the ear canal, breathable, comfortable wear. 6. Excellent noise reduction for long wear.Production process: 1. Clean ears and wash hands thoroughly. Dirt and debris will affect the cure rate of this product, have a mirror ready beforebeginning2. Gently remove material from each container and divide into two equal portions, store the remaining halves in their respective containers. Keep the colored and white material separated until ready to begin the molding since mixing the two parts, will start the curing process.3. To begin the curing process, knead one of the colored halves and white halves together vigorously for 30-45 seconds or until streak-free. Roll into a ball.
4. keeping your head level, gently press material into one ear by pushing in the center of the silicone, fold the excess in and press the center again several times. The silicone will then conform to your ear’s contour forming a good seal. Fill outer ear as completely and smoothly possible. A mirror is helpful to render a smooth outer surface and finished look, any excess material not needed to fill outer ear during molding can be pinched off before totally cured and discarded. Do not press material too deeply into theearcanal, do not chew or talk during this process. Once a uniform, consistent plug is formed, let plug cure for a minimum of 10 minutes in the ear, allow longer if formed plug is still pliable
5. A properly formed ear plug will have a smooth outer surface, closely contour to the ear partially extend into the ear canal.
6. Do not remove the plug from the ear for a minimum of 10 minutes,once cured, gently remove the plug by slowly twisting and pulling from the top of formed plug, it is recommended the finished ear plug cure an additional three hours before storing in the storage bag .
7. Repeat the above steps with the remaining colored and white silicone portions for your other ear.

NRR of custom molded earplug:
Customized molded ear plugs catty a label showing a noise reduction rating or NRR.
If you mold and wear custom molded earplugs in accordance with the directions, the noise entering the ear will be reduced by about 26db.
Feature Soft, permanent, contoured, waterproof, nontoxic and hypo-allergenic
MPA tensile breaking strength > 1.5
% elongation at break >300%
color various
Use: Shooting, racing, swimming, aviation, noise protection, communication system
Shipping Information:
  • FOB Port: Guangzhou
  • Lead Time: 10 - 15 days
  • HTS Code: 3910.00.00 00
  • Dimensions per Unit: 10 × 2 × 11.2 Centimeters
  • Weight per Unit: 50 Grams
  • Units per Export Carton: 500
  • Export Carton Dimensions L/W/H: 60 × 47 × 45 Centimeters
  • Export Carton Weight: 26.5 Kilograms
Main Export Markets:
  • Asia
  • Australasia
  • Central/South America
  • Eastern Europe
  • Mid East/Africa
  • North America
  • Western Europe

Other products