Ultra-fine Pulverizer
Delivery term:The date of payment from buyers deliver within days-
Price:
Negotiable
- minimum:
- Total supply:
-
Delivery term:
The date of payment from buyers deliver within days
-
seat:
Shanghai
-
Validity to:
Long-term effective
-
Last update:
2023-09-25 08:57
-
Browse the number:
364
+
- Contactaixin:
Contactaixin:
shanchao(Mr.)
- Email: telephone: phone:
-
Area:
Shanghai
Address:Industrial Park, Pudong New District, Shanghai, China
- Website:
+
Â
Ultra-fine pulverizer is a new type of grinding mill specially used to grind non-metallic minerals to 325-3000 mesh ultra-fine powder. By absorbing advantages from 12 kinds of different mills, our engineers finally developed this high-efficiency and low-cost ultra-fine pulverizer by investigation and trial.
Â
Â
Â
The raw material will be fed into the hammer crusher to be crushed. The bucket elevator will load the crushed material below 20mm and then feed it into the main mill through a hopper and a belt feeder.
The motor of the main mill drives the center shaft and disc rotor to rotate through the reducer. The roller pins on the edge of the grinding disc drive the grinding rollers to roll in the mill roller path. The material will fall on the distribution plate above the disc rotor, moving sideward under the action of centrifugal force, and then falling into the mill roller path for being crushed and grinded between the ring and rollers. After being processed through roller paths, the material will become ultra-fine powder. The high-pressure blower will inhale outside air into the mill body, then taking the grinded material into the powder classifier.
Â
The rotating impellers in the classifier will drive the coarse particles to fall back for repeated grinding,with the qualified fine powder forced into the cyclone powder collector along with the air flow and discharged from the lower discharge valve as finished products, while the air flow with small amount of fne dust will be discharged out of the mill via the blower and muffler after being purified by the impulse dust collector.
Â
Â
No. |
Picture |
Name |
1 |
Rollers |
|
2 |
Ring |
|
3 |
Turntable |
|
4 |
Pins |
Â
Â
Content |
Model |
||||
MSF600 |
MSF800 |
MSF1000 |
MSF1250 |
MSF1680 |
|
Roller qty. |
12Â pcs |
21 Â pcs |
28Â pcs |
32pcs |
44pcs |
Diameter of ring |
Φ600 mm |
Φ800 mm |
Φ1000mm |
Φ1250mm |
Φ1680 |
Main unit speed |
250-280rpm |
230-240rpm |
180-200rpm |
135-155rpm |
120-130rpm |
Max. feeding size |
20mm |
10mm |
20Â mm |
20mm |
25mm |
Final size |
325-2500mesh |
325-2500mesh |
325~2500Â mesh |
325~2000Â mesh |
325~1500Â mesh |
Capacity |
0.2~3tph |
0.5~4.5tph |
1~8.5tph |
2.5-14tph |
5~25tph |
Dimension |
11.5×3.5×5.2m |
13×3×5.8m |
18×4.6×8.6m |
14×9×10.25m |
16×5×11m |
Main unit |
45KW |
75KW/2×37KW |
132KW |
185KW |
280/315KW |
Classifier |
15KW |
18.5KW |
30KW |
4×15KW |
5×18.5 |
Blower |
37KW |
45KW |
75KW |
110KW |
2×90KW |
Hammer crusher |
PC300×400 |
PC400×600 |
PC400×600 |
PC600×800 |
PC600×800 |
PC600×800 |
|||||
PC400×600 |
|||||
11KW/18.5KW |
18.5KW |
18.5KW/45KW |
45KW |
45KW |
|
Bucket elevator |
TH200×8.2m |
TH200×9.79m |
TH300×11.05m |
TH300×13.55m |
TH300*16.31m |
3KW |
3KW |
4KW |
5.5KW |
7.5KW |
|
Belt feeder |
300×60×1M |
300×60×1.8M |
300×60×1.8M |
400×80×2M |
400×80×2.8M |
1.1KW |
1.5KW |
1.5KW |
1.5KW |
2.2KW |
|
Dust collector |
DMC96 |
DMC120/160 |
LDMC250 |
LDMC450 |
2×LDMC400 |
Air compressor |
LG3.2/8 |
KSH150D |
KSH300D |
LG6.2/8 |
LG10/8 |
11KW |
11KW |
22KW |
37KW |
55KW |
Â
Â
Â
http://www.mrcrushermill.com/